Outdoor Banner Frame FAQs - The Banner Bar

Get answers to common questions about outdoor banner frames. Find solutions to your FAQs on outdoor banner frame installation, maintenance, and more.

How does The Banner Bar increase banner durability?

The short answer:  The telescoping bar prevents the vertical T-posts from collapsing inward while the banner is wind-loaded.   
The long answer:  The telescoping bar is the primary component that increases banner durability however the bungees and pole covers also play a key roll in how The Banner Bar works.  The bungees are sized specifically for The Banner Bar, providing the right amount of tension on the banner while providing the perfect "give" in windy conditions.  The pole covers improve the durability of the bungees by preventing the bungees from wearing out against the sharp edges of the T-posts.   When installed correctly (per the provided instructions and install videos), The Banner Bar is guaranteed to increase the durability of a banner over hanging a banner with rope between two T-posts.

Are T-posts included with The Banner Bar kits?

T-posts are not included with the kits.  T-posts are available in most cities and towns at an inexpensive price (under $10 each).  We found that the cost of shipping heavy / long T-posts was cost prohibitive when they are readily available in most areas.  See our resource page (where to buy T-posts) for our suggested retailers.  Do not buy the "garden variety" T-posts sold at most home improvement stores.

What length of T-posts is required?

The Banner Bar is designed to use 6'-6" long T-posts with a minimum weight of 1.25 lbs per foot.  This length provides the proper amount of T-post in the ground (below grade) to support wind-loading.  

What tools do I need to install T-posts?

You will need a T-post Driver to properly drive T-posts into the ground.  See our resource page (where to buy T-posts) for our suggested T-post Driver retailers.  Click on the T-post Driver buttons to see our recommended selections.  We also highly suggest wearing hearing protection and gloves when driving T-posts.  Watch install video #0 to see how to space your T-posts using the telescoping bar as your measuring device.

What is the maximum banner height supported by The Banner Bar?

All Banner Bar kits will support 4' high banners.  When a 4' high banner is installed, the bottom of the banner will be approximately 1" from the ground.  If you are installing Three Post or Four Post kits, we recommend limiting your banner height to 42" to allow room for the wind to escape below the banner.  

Can The Banner Bar be customer installed?

Yes, The Banner Bar was designed to be installed by the end user however we suggest that you offer an installation service to best serve your clients.  Sign professionals will be more attentive to driving the posts straight, selecting the most visible position, etc.  We've provided both written instructions as well as detailed installation videos.

Are replacement parts available?

Yes, we offer all replacement parts in the event that a Banner Bar is vandalized, damaged or parts have been lost.  Call for replacement part pricing: 970-650-5173.